Band-it IT5000-C User Manual

IT5000-C / IT6000-C
3/8” IT Tool
www.BAND-IT-IDEX.com
Document # P48850 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Page 1 of 36
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Operating
Manual
IT5000-C / IT6000-C
3/8” BAND-IT
®
Pneumatic IT Tools
Patent Pending

Band-it IT5000-C Specifications

General

Brand	Band-it
Model	IT5000-C
Category	Nail Gun
Language	English

Summary

Safety Guidelines

Additional Safety Guidelines

Detailed safety precautions and warnings for tool operation and handling.

Tool Overview

Model Identification

Explains the naming convention and configuration options for the IT tools.

IT Tool Options

Tool / Component Identification

Air System Requirements

Air System Settings

Initial Setup – Pneumatic Settings

Steps for connecting the tool to the air controller module and initial air pressure setup.

Setting the Tool Air Pressure

Guidance on how to correctly set the tool's air pressure for optimal clamp tension.

Tie-Lok® Tie / Jr® Clamp Installation Procedure

IT Tool Orientation Requirements

Clamp Placement

Trouble Shooting Guide: Unable to Achieve Tension

Trouble Shooting Guide: Tool Symptoms

Preventative Maintenance

Maintenance: Replacement Parts

Lists part numbers and descriptions for common replacement parts for the IT tools.

Maintenance: Cutoff Timing Adjustment

Quality assurance testing equipment

Warranty

Information regarding warranty terms, conditions, and how to make claims.