MULTIPURPOSE EGG SHAPED DECISIVE WEAPON
EVATCHI
Product Details The Angel Awakens
Front
Back
Casing
(Body)
Ball
chain
Monitor
(LCD screen)
A button B button C button
Select
Train
Execute
Timer display
Cancel
Confirm call
Hook the ball chain
inside the clasp, and
pull on the chain to
lock the ball chain to
the clasp.
Press on the holder
with the ball chain in
place to remove the
ball chain.
Battery
cover
Push lock
Reset
switch
※Images do not represent the final product.
For explanation purposes only.
Battery
tab
Reset
switch
Pull on the tab from the bottom of
the casing.
【
HOW TO RESET
】
Press on the reset switch on the back
of the casing with a tipped object.
※
Do not press hard on the reset switch
using pointed objects, such as mechanical
pencils, to prevent damage to the device.
※
Please press the reset switch aer
changing batteries.
The timer setting screen will
appear aer a long beep.
A long beep will play.
【
SETTING THE TIMER
】
Use button (A) to set the
time in order of “hours”
→
“minutes”. Use button (B)
to execute the changes.
Press button (C) to return
a step back.
【
THE ANGEL AWAKENS
】
Once the timer is set, the
Angel will appear as a fetus
hardened with bakelite,
and will immediately break
out of its containment to
begin its growth.
※
Please go through the
【
HOW TO RESET
】
instructions if the device or screen doesn’t function
properly.
※
There is no save function to the product. Please be warned that changing batteries or going
through the
【
HOW TO RESET
】
instructions will reset your current play data.
Hardened
with
bakelite
Awakens
Timer Controls
Turning the sound
on and off
Changing batteries
Press button (B) during the Angel display
screen to transition to the timer screen.
Press button (B) again to return to the
Angel display screen.
To view the time
Press button (B) to transition to the timer
screen, then press button (A) while button
(C) is pressed to transition to the timer
setting screen.
To set the time, please follow the
instructions under [SETTING THE
TIMER] (see “2. The Angel Awakens”).
To adjust the time
Press button (A) while button (C) is
pressed during the Angel display screen
to transition to the sound select screen.
Use button (A) to select between “ON” or
“OFF” then press button (B) to execute
the change.
Low batteries may cause the screen to go
blank and may lead to loss of controls.
Please replace the batteries when the low
battery icon is displayed.
Slide the battery cover
downward (IMAGE
❷
) while
pressing down on the push
lock on the back (IMAGE
❶
)
using a pointed object.
Remove the batteries and
replace them with new
batteries (2 x LR44
batteries; sold separately) making sure that the
+
and
-
of the batteries are properly set.
※
Always replace both batteries at the same time.
Always go through the
【
HOW TO RESET
】
instructions (see “2. The Angel Awakens”)
aer the battery cover is placed back into
its closed position.
※
Please be warned that turning the
sound “OFF” will prevent the Angel’s
call from ringing.
Low
battery
icon
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Do not wash the product in the clothes pocket.
Instruction
Manual
©khara ©BANDAI,WiZ
6
-years old and above
To Next Page
Need help?
General
