To Next PageTo Next PageWhat to do if my B&B ARMR LXL-15vp-SS Gate Opener does not respond when commanded?
If your B&B ARMR Gate Opener isn't responding, there are several things to check: * Verify power at CONN 9 when a command is given. * Inspect the overload protector. * Check the PLC output and input. * Ensure safeties are clear and IR Beams are aligned. * Check the +24VDC at CONN3 pins 8 and 10.
Why does my B&B ARMR Gate Opener drive the gate too slowly?
If your B&B ARMR Gate Opener is moving the gate too slowly, consider the following: * Check for any binding of the gate. * Check for slippage of the drive wheels. * Check the fluid level in the reservoir. * Evaluate the hydraulic fluid quality; old fluid can become sludgy and may clog the internal filter.
What to do if my B&B ARMR Gate Opener drive wheels slip on the gate?
If the drive wheels on your B&B ARMR Gate Opener are slipping, try these steps: * Disengage the drive wheels and manually check the gate for any binding to ensure it moves smoothly. * Check and adjust the tension of the drive wheels as needed. * Inspect the drive rail for any water or precipitation.
What to do if my B&B ARMR Gate Opener shows a MAX Runtime Error?
If you're seeing a MAX Runtime Error on your B&B ARMR Gate Opener, consider these checks: * Look for any binding of the gate. * Check for slippage of the drive wheels. * Check the fluid level in the reservoir. * Check the MAX RUN TIME setting in Parameters to ensure sufficient time is set for the gate size. * Remember that the gate may only move 1 ft/sec.
General| Brand | B&B ARMR |
|---|---|
| Model | LXL-15vp-SS |
| Category | Gate Opener |
| Language | English |
Definition and role of Underwriters Laboratories (UL) in product certification.
History and evolution of the UL-325 standard for gate operators.
Key aspects and requirements of the UL-325 standard for gate systems.
Categorization of gate operators based on usage class and entrapment protection.
Guidelines for gate construction and installation to ensure safety and compliance.
Specific installation requirements for various entrapment protection devices.
Key statements from manufacturer instructions regarding gate operator installation.
Recommendations for dealers on documenting gate installation projects.
Overview of the B&B ARMR LXL hydraulic sliding gate operator.
Detailed features and options of the LXL hydraulic slide gate operator.
List and specifications of the available LXL series gate operator models.
Instructions for preparing the concrete pad for gate operator installation.
Steps for securely anchoring the gate operator to the prepared concrete pad.
Procedure for mounting the drive rail onto the gate panel.
Guidance on installing limit switch trip plates for gate positioning.
Instructions for connecting the primary power supply to the gate operator.
Steps for installing and adjusting limit switches for gate operation.
Connecting primary and battery power for DC units.
Procedure for connecting the converter enclosure to the gate operator.
Instructions for installing the vent cap on the hydraulic reservoir.
Procedure to set the gate operator's handing configuration.
Setting the HCMSGOFF parameter for operator behavior.
Guide for optionally setting the date and time on the gate operator.
Configuration of the maximum run timer for the gate operator.
Procedure to enable or disable the automatic timer to close feature.
Setting the duration for the automatic timer to close feature.
Adjusting the inherent safety parameters for the gate operator.
Configuring the gate locking mechanism parameters.
Setting parameters for the maglock functionality.
Configuring the delay parameter for maglock operation.
Enabling or disabling maintain command features for gate inputs.
Setting the MAINOPEN parameter for the gate operator.
Detailed list and illustration of all parts for the gate operator.
Schematic diagram illustrating the battery backup system components and connections.
Definitions and meanings of various alarm codes and beeps.
Description of PLC input and output terminals and their functions.
Template for recording gate operator maintenance activities and observations.
