To Next PageTo Next PageWhat to do if my B&B ARMR LXLB-13vp-HS Gate Opener does not respond when commanded?
If your B&B ARMR Gate Opener isn't responding, there are several things to check: * Verify power at CONN 9 when a command is given. * Inspect the overload protector. * Check the PLC output and input. * Ensure safeties are clear and IR Beams are aligned. * Check the +24VDC at CONN3 pins 8 and 10.
Why does my B&B ARMR LXLB-13vp-HS drive the gate too slowly?
If your B&B ARMR Gate Opener is moving the gate too slowly, consider the following: * Check for any binding of the gate. * Check for slippage of the drive wheels. * Check the fluid level in the reservoir. * Evaluate the hydraulic fluid quality; old fluid can become sludgy and may clog the internal filter.
What to do if my B&B ARMR Gate Opener drive wheels slip on the gate?
If the drive wheels on your B&B ARMR Gate Opener are slipping, try these steps: * Disengage the drive wheels and manually check the gate for any binding to ensure it moves smoothly. * Check and adjust the tension of the drive wheels as needed. * Inspect the drive rail for any water or precipitation.
What to do if my B&B ARMR Gate Opener shows a MAX Runtime Error?
If you're seeing a MAX Runtime Error on your B&B ARMR Gate Opener, consider these checks: * Look for any binding of the gate. * Check for slippage of the drive wheels. * Check the fluid level in the reservoir. * Check the MAX RUN TIME setting in Parameters to ensure sufficient time is set for the gate size. * Remember that the gate may only move 1 ft/sec.
General| Brand | B&B ARMR |
|---|---|
| Model | LXLB-13vp-HS |
| Category | Gate Opener |
| Language | English |
