Need help?Do you have a question about the B&C Technologies SI Series and is the answer not in the manual?
General| Type | Commercial Washer |
|---|---|
| Frequency | 60 Hz |
| Voltage | 208V or 240V |
| Current | Varies by model |
| Water Consumption | Varies by model |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Material | Stainless Steel |
| Cycle Options | Multiple programmable cycles |
Precautions before starting repairs and service on the machine.
Procedures for visually inspecting the machine for shipping damage upon receipt.
List of safety checks required before initial machine startup, covering various aspects.
Guidelines for ensuring adequate capacity and proper setup of the machine's drain system.
Procedures and requirements for safely connecting the machine to the electrical power supply.
Requirements and procedures for connecting the hot and cold water supply lines to the machine.
Requirements and best practices for connecting the compressed air supply to the machine.
Procedures for connecting external chemical supply systems, including hoses and signal connections.
Steps to perform a functional test on the machine after installation is complete.
To Next Page
