Need help?Do you have a question about the B&C Technologies HE-45 and is the answer not in the manual?
Safety warnings regarding moving parts and electrical hazards before servicing.
How to contact B&C Technologies for literature and spare parts.
Guidance on safety symbols (DANGER, WARNING, CAUTION) used throughout the manual.
Requirements for grounding the machine according to electrical codes.
Key safety rules for operating and installing the washer-extractor.
Contact information for technical assistance and support in the US.
Instructions for ordering replacement parts and literature.
Explanation of how the HE series washer-extractor operates, including motor, water, steam, and door systems.
Procedures for inspecting the equipment for shipping damage upon arrival.
Pre-operation safety checks for electrical, plumbing, and door interlock systems.
Daily checks to ensure operator safety, including warning signs and door interlocks.
Requirements for a safe operating environment, including avoiding flammable fluids.
Guidelines for optimal environmental conditions (temperature, humidity, ventilation) for machine operation.
Requirements for foundation strength, thickness, and service space.
Specifications for water pressure, steam pressure, drainage, and electrical grounding.
Special considerations for AC drive operation, including environment and power supply.
Warnings against improper uses of the machine, such as washing hazardous materials or allowing children near it.
Recommended minimum clearances for installation and service access.
Importance of a stable foundation and floor load data for installation.
Details on constructing the machine foundation, including grouting and anchor bolts.
General information about mounting bolt installation.
Specific details for installing mounting bolts for the HE-35 model.
Specific details for installing mounting bolts for the HE-45 model.
Specific details for installing mounting bolts for the HE-65 model.
Specific details for installing mounting bolts for the HE-85 model.
Specific details for installing mounting bolts for the HE-110 model.
Requirements for adequate drain system capacity and flexible connections.
Guidelines for clean power supply, circuit breakers, and voltage considerations.
Procedures for connecting hot and cold water lines, including pressure and temperature requirements.
Instructions for installing steam piping and filters for optional steam heat.
Procedures for connecting chemical injectors and dispenser pumps.
Details on connecting chemical supply lines to the dispenser and external supply box.
Information on connecting external chemical supply pumps via terminal block signals.
Steps for performing a function test after installation, checking voltage, phase, and cycles.
Explanation of the push-to-open/push-to-close door lock system and its advantages.
Step-by-step instructions for opening and closing the machine door.
Daily checks and monthly lubrication for the door lock system.
Guidance on proper machine loading to ensure performance, longevity, and avoid wear.
Procedures for selecting and executing wash programs using the computer keypad.
How to select the desired wash cycle number on the display.
How to start, abort, and monitor wash cycles.
Daily maintenance tasks, including checking hoses, wires, and door interlocks.
Specific daily checks to perform at the start of the day.
Daily end-of-day cleaning and preparation tasks.
Weekly maintenance tasks, including checking for leaks and cleaning air filters.
Monthly maintenance procedures, including lubrication and drive inspection.
Quarterly maintenance tasks, including tightening fasteners and checking anchor bolts.
Guidelines for cleaning and maintaining stainless steel surfaces to prevent corrosion.
Procedures for obtaining service and contact information for technical assistance.
Information on ordering replacement parts and necessary details for processing orders.
Steps for safely decommissioning the machine, including cleaning, power disconnection, and recycling.
General| Brand | B&C Technologies |
|---|---|
| Model | HE-45 |
| Category | Washer |
| Language | English |
To Next Page
