To Next PageTo Next Page
Need help?Do you have a question about the B&G WS700 and is the answer not in the manual?
Provides physical measurements and diagrams for the WS700 wind sensor, including height and width.
Details the specific height ('H') dimensions for different WS700 sensor models (WS710, WS720/720S, WS730/730S, WS740S).
Lists components provided in the wind sensor and sensor-only packs: WS700 sensor, junction box, mast cable, documentation.
Details available accessories, including mast top bracket, mast face bracket, and interface module for enhanced installation.
Instruction to align the top of the wind sensor spar with the centerline of the boat for proper installation.
Details wind range, wind speed accuracy, and wind angle accuracy for WS700 sensor models.
Covers mounting options, cable lengths, supply voltage, power consumption, water resistance, and temperature ranges.
Information on NMEA 2000 and NMEA 0183 connectivity, including sensor output format.
Illustrates wiring connections for mast cable, network interface, and T-joiner using color-coded cables.
Defines the function of Red, Black, Blue, and White wires in the sensor cable.
Specifies serial port settings: Baud Rate (38400), Data Bits (8), Parity (None), and Stop Bits (1).
States compliance with Radiocommunications (Electromagnetic Compatibility) standard 2017 and EMC Directive 2014/30/EU.
Provides physical measurements and diagrams for the WS700 wind sensor, including height and width.
Details the specific height ('H') dimensions for different WS700 sensor models (WS710, WS720/720S, WS730/730S, WS740S).
Lists components provided in the wind sensor and sensor-only packs: WS700 sensor, junction box, mast cable, documentation.
Details available accessories, including mast top bracket, mast face bracket, and interface module for enhanced installation.
Instruction to align the top of the wind sensor spar with the centerline of the boat for proper installation.
Details wind range, wind speed accuracy, and wind angle accuracy for WS700 sensor models.
Covers mounting options, cable lengths, supply voltage, power consumption, water resistance, and temperature ranges.
Information on NMEA 2000 and NMEA 0183 connectivity, including sensor output format.
Illustrates wiring connections for mast cable, network interface, and T-joiner using color-coded cables.
Defines the function of Red, Black, Blue, and White wires in the sensor cable.
Specifies serial port settings: Baud Rate (38400), Data Bits (8), Parity (None), and Stop Bits (1).
States compliance with Radiocommunications (Electromagnetic Compatibility) standard 2017 and EMC Directive 2014/30/EU.
General| Compatibility | B&G systems |
|---|---|
| Measurement Range (Wind Direction) | 0 to 360 degrees |
| Storage Temperature | -30°C to +70°C |
| Wind Angle Range | 0 to 360 degrees |
| Battery Type | Lithium |
