To Next Page
C
connerbrendaJul 29, 2025
Why won't the on screen menu display on my B&K CT300?
- DDr. Cassandra DavidsonJul 29, 2025
The On Screen Menu for your B&K Receiver is only accessible from Zone A.
Why won't the on screen menu display on my B&K CT300?
The On Screen Menu for your B&K Receiver is only accessible from Zone A.
What to do if the source control is inconsistent on B&K CT300?
If the control of sources for your B&K Receiver is inconsistent, verify the flasher output setting.
How to troubleshoot keypads that won't power up on a B&K Receiver?
If the keypads for your B&K Receiver are not powering up, check the connection at the receiver back panel and re-terminate the CAT5 ends.
How to fix a B&K Receiver CT that won't power up?
If the CT receiver will not power up, check the power cord and/or power supply.
What to do if the keypad on my B&K CT300 Receiver won’t pass IR?
If the keypad won’t pass IR, re-terminate the CAT5 ends and securely connect to the receiver back panel.
Why are the keypads on my B&K CT300 Receiver going to a blank page?
Keypad feedback is out of sync, see page 57.
General| Power Output | 150W per channel (8 ohms) |
|---|---|
| Input Sensitivity | 200 mV |
| Dimensions | 17.2 x 6.8 x 17.1 inches |
| Weight | 39.7 lbs |
| Type | Receiver |
| Digital Inputs | Coaxial (2), Optical (2) |
Describes the capabilities and advantages of the CT Receiver.
Details the functionality and advantages of the CK1.2 keypad.
Illustrates the basic connection of CT Receiver and CK1.2 Keypads.
Explains how to connect CK1.2 keypads to the CT Receiver.
Details the wiring and terminal functions for CK1.2 keypad connections.
Describes how to connect shared sources to the CT Receiver.
Details how to use triggers like doorbells for system events.
Describes methods for coupling two CT Receivers for expanded zones.
Explains how to add an additional zone using a home theater receiver.
Illustrates a basic system expansion using the CT-1 integrator.
Describes integrating B&K home theater products into a CT system.
Guides through the initial setup and overview of BKcSuite software.
Configures hardware zone settings like mode and level control.
Explains how to split zones into mono for independent control.
Details configuration for groups, code sets, and zone assignments.
Configures actions triggered by events like doorbells or audio/video sensing.
Configures security settings for front panel buttons, IR, memory, and setup access.
Configures RS-232 communication parameters, IDs, and feedback.
Configures security settings for front panel, memory, and setup access.
Provides solutions for BKcSuite setup and communication issues.
Lists common problems and solutions for CT Receivers.
