Need help?Do you have a question about the B&K AVR505 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Signal-to-Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs | 2 Optical, 1 Coaxial |
| Analog Audio Inputs | 5 |
| Input Impedance | 47 kOhms |
| Speaker Impedance | 8 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Surround Sound Formats | Dolby Digital, DTS |
Guides connecting digital audio sources via coaxial or optical cables.
Guides the setup of speaker size, location, and levels for optimal audio.
Configures input source assignments and default audio modes.
Saves and recalls custom receiver settings for quick access.
Guides the selection of audio and video sources.
Controls the master volume and mute functions.
Selects between various audio processing modes for different content.
Adjusts audio equalization curves for different listening preferences.
Configures Zone 1 settings like max volume, Zone ID, and OSD.
To Next Page
