Need help?Do you have a question about the B&K AVR202 Plus and is the answer not in the manual?
Description of buttons, power switch, volume control, and headphone jack.
Explains the receiver's display screen and status indicator lights.
Detailed listing and description of all rear panel connections.
Instructions on using the receiver's menu navigation controls.
Guide for setting up speakers, including size and location.
Configuring the size and type for front left and right speakers.
Configuring the size and type for surround left/right speakers.
Setting subwoofer options and bass routing.
Setting speaker distances for optimal audio imaging.
Equalizing individual speaker volume levels for balanced sound.
Configuring crossover frequencies and LFE settings.
Adjusting bass information level to prevent distortion.
Setting LFE level and DTS LFE mode preference.
Inverting subwoofer phase to correct low-end response issues.
Correcting tonal errors and optimizing room acoustics.
Setting a notch filter to reduce accentuated bass frequencies.
Setting default bass and treble levels for all sources.
Configuring the size and type for the center speaker.
Configuring the size and type for surround back speakers.
Adjusting high and low pass filter frequencies and slopes.
Setting manual or auto operation for Zone 1 video output.
Configuring input sources, favorites, and levels.
Assigning default speaker configurations for specific input sources.
Setting default audio modes and speaker selections per source.
Setting menu visibility, memory lock, and IR lock.
Configuring advanced settings for Zone 1, including levels and IDs.
To Next Page
General
