To Next Page
C
connerbrendaJul 29, 2025
Why won't the on screen menu display on my B&K CT300?
- DDr. Cassandra DavidsonJul 29, 2025
The On Screen Menu for your B&K Receiver is only accessible from Zone A.
Why won't the on screen menu display on my B&K CT300?
The On Screen Menu for your B&K Receiver is only accessible from Zone A.
What to do if the source control is inconsistent on B&K CT300?
If the control of sources for your B&K Receiver is inconsistent, verify the flasher output setting.
How to troubleshoot keypads that won't power up on a B&K Receiver?
If the keypads for your B&K Receiver are not powering up, check the connection at the receiver back panel and re-terminate the CAT5 ends.
How to fix a B&K Receiver CT that won't power up?
If the CT receiver will not power up, check the power cord and/or power supply.
What to do if the keypad on my B&K CT300 Receiver won’t pass IR?
If the keypad won’t pass IR, re-terminate the CAT5 ends and securely connect to the receiver back panel.
Why are the keypads on my B&K CT300 Receiver going to a blank page?
Keypad feedback is out of sync, see page 57.
General| Power Output | 150W per channel (8 ohms) |
|---|---|
| Input Sensitivity | 200 mV |
| Dimensions | 17.2 x 6.8 x 17.1 inches |
| Weight | 39.7 lbs |
| Type | Receiver |
| Digital Inputs | Coaxial (2), Optical (2) |
