To Next PageTo Next Page
Need help?Do you have a question about the B&M Boltzero Bunk Bed and is the answer not in the manual?
General advice on checking parts, preparing the space, and safe assembly practices.
Critical safety warnings related to bunk bed usage, strangulation, falls, and structural integrity.
Instructions for cleaning the bed and periodic checks for security.
Attaching the footings (A) to the end posts (1, 2, 3) as shown in the diagram.
Securing the lower side rails (5) to the end posts with the help of an assistant.
Attaching the upper side rails (4) to the end posts and locking them in place.
Attaching the lower front rail (6) and lower back rail (7) to the end posts.
Attaching the lower front and back rails to the other end posts to complete the frame.
Securing the upper back safety rail (10) to the end posts for structural integrity.
Attaching the ladder (8) to the washers (D) and the lower front rail (6), ensuring correct orientation.
Positioning the upper front safety rail (9) and aligning it with the ladder and end posts.
Attaching the upper slats (11) to the upper rails (9, 10), ensuring the bed frame is straight.
Attaching the lower slats (11) to the lower rails (6, 7) following the same procedure.
Attaching long caps (B) and short caps (C) to the end posts using a rubber mallet.
Instructions for securely fixing the bunk bed to the wall for safety.
Crucial advice on wall plug selection, drilling, and ensuring secure installation for safety.
Details on various wall plug types suitable for different wall materials and load requirements.
Guidance on checking fittings and ensuring the ongoing safety of wall-mounted components.
Identifies the metal slats pusher tool needed for removing slats from the bed.
Step-by-step instructions on how to use the tool to detach the bed slats.
General| Brand | B&M |
|---|---|
| Model | Boltzero Bunk Bed |
| Category | Indoor Furnishing |
| Language | English |
