To Next PageTo Next Page
Need help?Do you have a question about the B&R Automation PC 810 and is the answer not in the manual?
General| Brand | B&R |
|---|---|
| Model | Automation PC 810 |
| Category | Controller |
| Language | English |
Outlines important safety guidelines for intended use, ESD protection, handling, and environmental conditions.
Discusses ambient temperature considerations for APC810 configurations, including worst-case conditions and temperature monitoring.
Explains the supply voltage block diagram and provides power calculation tables for different system units.
Details various device interfaces including power supply, serial ports, monitor/panel connection, Ethernet, and USB.
Provides information on mounting the APC810 systems using mounting plates and M5 screws, including important considerations.
Describes the functional ground connections and provides guidelines for secure dissipation of electric disturbances.
Guides the user through configuring SATA RAID arrays, including creating, deleting, rebuilding sets, and low-level formatting.
Provides general information on BIOS, setup procedures, and explanations of various BIOS settings.
Details BIOS and firmware upgrade procedures, including necessary information and potential problems.
Covers the installation and drivers required for Windows XP Professional on the Automation PC 810.
Details the installation process and special considerations for Windows 7 on the APC810, including driver availability.
Describes the ADI Control Center for accessing device functions, including installation, SDL equalizer settings, and UPS configuration.
Details emission requirements, including network-related emissions and electromagnetic emissions limits according to various standards.
Outlines immunity requirements for electrostatic discharge, HF fields, transient disturbances, surges, conducted disturbances, and magnetic fields.
Covers mechanical testing requirements for vibration, shock, toppling, and free fall (packaged) conditions.
Covers safety-related testing requirements such as ground resistance, insulation resistance, high voltage, leakage current, and overload.
Describes the functionality, features, requirements, and order data for the optional integrated UPS module.
Provides information on changing the system battery, including precautions and procedure for qualified personnel.
Guides through the process of installing or exchanging slide-in compact drives, emphasizing hot-plug capability.
Details the procedure for installing or exchanging slide-in slot drives in APC810 system units with varying card slot configurations.
Details the installation process for the UPS module, including variations based on system unit type and add-on interface modules.
Details the procedure for replacing a defective hard disk in a RAID 1 configuration, including necessary tools and steps.
