B&R Automation PC 810 - Chapter 5: Standards and certifications

Standards and certifications • Applicable European directives
Chapter 5
Standards and
certifications
327Automation PC 810 with GM45 CPU board User's Manual V 1.14
Chapter 5 • Standards and certifications
1. Applicable European directives
• EMC directive 2004/108/EC
• Low-voltage directive 2006/95/EC
• Machine directives 98/37/EC beginning 12/29/2009: 2006/42/EC
2. Overview of standards
Standard Description
EN 55011
Class A
Electromagnetic compatibility (EMC), radio disturbance product standard, industrial, scientific, and
medical high-frequency devices (ISM devices), limit values and measurement procedure; group 1
(devices that do not create HF during material processing) and group 2 (devices that create HF during
material processing)
EN 55022
Class A
Electromagnetic compatibility (EMC), radio disturbance characteristics, information technology
equipment (ITE devices), limits and methods of measurement
EN 60060-1 High-voltage test techniques - part 1: General specifications and testing conditions
EN 60068-2-1 Environmental testing - part 2: Tests; test A: Dry cold
EN 60068-2-2 Environmental testing - part 2: Tests; test B: Dry heat
EN 60068-2-3 Environmental testing - part 2: Tests; test and guidance: Damp heat, constant
EN 60068-2-6 Environmental testing - part 2: Tests; test: Vibration (sinusoidal)
EN 60068-2-14 Environmental testing - part 2: Tests; test N: Change of temperature
EN 60068-2-27 Environmental testing - part 2: Tests; test and guidance: Shock
EN 60068-2-30 Environmental testing - part 2: Tests; test and guidance: Damp heat, cyclic
EN 60068-2-31 Environmental testing - part 2: Tests; test: Drop and topple, primarily for equipment-type specimens
EN 60068-2-32 Environmental testing - part 2: Tests; test: Free fall
EN 60204-1 Safety of machinery, electrical equipment on machines - part 1: General requirements
EN 60529 Degrees of protection provided by enclosures (IP code)
EN 60664-1 Insulation coordination for equipment within low-voltage systems - part 1: Principles, requirements and
tests
EN 60721-3-2 Classification of environmental conditions - part 3: Classification of groups of environmental
parameters and their severities, section 2: Transport
EN 60721-3-3 Classification of environmental conditions - part 3: Classification of groups of environmental
parameters and their severities, section 3: Stationary use at weather-protected locations
Table 187: Overview of standards