Need help?Do you have a question about the Bang & Olufsen BeoAmp 2 and is the answer not in the manual?
General| Brand | Bang & Olufsen |
|---|---|
| Model | BeoAmp 2 |
| Category | Amplifier |
| Language | English |
Key safety guidelines for product operation, covering handling, environment, and maintenance procedures.
Further safety advice on power connections, grounding, and specific environmental considerations.
Critical warnings regarding electrical shock, liquid exposure, and internal component safety.
Explanation of warning symbols for dangerous voltage and important operating instructions.
Overview of BeoAmp 2 as a compact, lightweight, high-quality Class D amplifier solution.
Highlights include ultra-compact design, low weight, 150W channels, low power consumption, and protection.
Details on channels, output power, signal sense, and standby power consumption.
Covers THD+N, dynamic range, idle noise, bandwidth, frequency response, and impedance.
Information on AC mains power, power connection, and operating temperature range.
Specifies height, width, depth, and weight of the amplifier unit.
Explanation of the status LED colors (Green/Red) indicating amplifier operation modes.
Details on AC Mains, On/Off switch, and various input/output connectors on the rear.
Describes Stereo RCA/phono and Power Link inputs for connecting audio signals.
Defines the pin description for the Power Link RJ45 connector, detailing signal assignments.
Covers enabling/disabling amplifier operation via Signal Sense, Power Link, or 12V trigger.
Details on Line/PL input selection, Stereo/Mono switch, and speaker output terminals.
Guidance on adjusting the amplifier's gain for different input signal levels.
Instructions and options for mounting the amplifier in a 19" AV rack using supplied ears.
Guidance on mounting the amplifier on flat surfaces like walls or ceilings using rack ears.
Tables detailing AWG and metric wire sizes, resistance, signal loss, and maximum length.
Instructions for proper disposal of electrical equipment, parts, and batteries to protect the environment.
To Next Page
