MASTER LINK
1.5m
Content ML/MCL Converter
ML/MCL Converter consists of a control box and an amplifier.
Application ML/MCL Converter is used where a conversion from Master Link (ML) to
Master Control Link (MCL) is wanted. Such a conversion is required if you
want to maintain the existing Master Control Link system although the
audio system in the main room is replaced with a Master Link driver, for
example a BeoSound Ouverture.
ML/MCL Converter can also be used in conjunction with a Beosystem AV
9000 with an AV 9000 Master Panel.
See setups with ML/MCL Converter, page 19.
Part no. 1165066 (AUS)
1165166 (EU)
1165266 (GB)
1165366 (USA/CDN)
Miscellaneous Besides the parts included with the ML/MCL Converter, the installation
requires a Master Link cable as well as plugs, sockets and junction boxes
(see the section on installation types, page 23).
10
To Next Page
Loading...
