MASTER LINK
INSTALLATION TYPES
The following section gives a brief introduction to two typical installation
types, namely the visible and the invisible installation. The examples
include various applications of Bang & Olufsen’s installation accessories,
which are shown at the end of the handbook.
The illustrations give only a few installation examples. There are many
alternatives, of course.
Visible installation
A visible installation is used where it is not possible to hide cable and
installation materials in the attic and/or in conduits in the wall.
In this example the following has been used:
1. 4 x Master Link cable with one plug
2. Master Link cable without plugs
3. 2 x Master Link junction box
4. 1 x BeoLink Video
5. 1 x datalink cable (included with BeoLink Video)
23
Invisible installation
This type of installation makes it possible to hide the cables and
installation materials in the wall and/or in the attic.
In this example the following has been used:
1. 4 x Master Link cable with two plugs
2. Master Link cable without plugs
3. 4 x Master Link wall socket
4. 1 x Master Link junction box
5. 1 x BeoLink Video
6. 1 x datalink cable (included with BeoLink Video)
To Next Page
Loading...
