Need help?Do you have a question about the Bang & Olufsen Beoplay H9 3rd Gen and is the answer not in the manual?
General| Headset type | Binaural |
|---|---|
| Product type | Headset |
| Product color | Gray |
| Wearing style | Head-band |
| Operating keys | Play/Pause |
| Detachable cable | Yes |
| Recommended usage | Calls/Music |
| Battery type | Built-in battery |
| Battery capacity | 1110 mAh |
| Battery recharge time | 3 h |
| Continuous audio playback time | 33 h |
| Wireless range | 10 m |
| Bluetooth version | 4.2 |
| Connectivity technology | Wired & Wireless |
| Microphone type | Built-in |
| Number of microphones | 6 |
| Cables included | Audio (3.5mm), USB Type-A to USB Type-C |
| Audio adapters included | Flight |
| Impedance | 24 Ω |
| Driver type | Electro-dynamic |
| Driver unit | 40 mm |
| Ear coupling | Supraaural |
| Headphone frequency | 20 - 20000 Hz |
Download the Bang & Olufsen app from the App Store or Google Play.
Turn on the Beoplay H9 3rd Gen headphones by sliding the power switch.
Pair your Beoplay H9 3rd Gen headphones with your device using Bluetooth.
Control music playback (play/pause) by tapping the touch interface on the earcups.
Adjust the volume by swiping up or down on the touch interface.
Skip tracks forward or backward by swiping on the touch interface.
Toggle Active Noise Cancellation (ANC) on or off via the touch interface.
Toggle Transparency mode on or off to hear ambient sounds using the touch interface.
Interact with Google Assistant using single or double presses on the button.
Activate voice commands via the Bang & Olufsen App with a single button press.
Charge the headphones using the provided USB cable and a power source.
To Next Page