BANGGOOD Bugs 7 - Throttle Control Stick Mode; Throttle mode switch; How to change throttle mode

Bugs 7 User Manual
!
Attention: To change the stick mode of the remote controller, please make sure that the remote controller
is under signal connection status (the indicator light keep flashing). If not, the stick mode could not
be changed.
How to change throttle mode
Step 1. Keep pressing the red button “ ” and turn on the remote controller, the remote controller is under signal
connection status (Pic. 1);
Step 2. Keep pressing the RTH button “ ” for 3 seconds to choose the throttle control mode (Pic. 2). The throttle control
mode will change according to each press. The mode number is shown on the LCD screen. The throttle control
mode is set at mode 2 by default.
Pic. 1 Pic. 2
Throttle mode switch
Mode 1: The right stick serves as the throttle.
Mode 2: The left stick serves as the throttle.
● The remote controller is set at Mode 2 by default.
Throttle Control Stick Mode
Mode 2
(Default)
Mode 1
Throttle
control
Leftward/
Rightward
flight control
Forward/
Backward
control
Turn Left/
Right control
Throttle
control
Leftward/
Rightward
flight control
Forward/
Backward
control
Turn Left/
Right contro
-17-