banks iDash 1.8 User Manual

01/07/20 PN 97670 V.2
iDash
®
1.8
Super Gauge
Aftermarket ECU Supplementary Manual
For use with iDash 1.8 connected to supported
aftermarket ECUs and "No OBD" configurations
THIS MANUAL IS FOR USE WITH PART NUMBER 66563 AND 66563-DL
Gale Banks Engineering
546 Duggan Avenue • Azusa, CA 91702
(626) 969-9600 • Fax (626) 334-1743
Product Information & Sales: (888) 635-4565
Customer Support: (888) 839-5600
Installation Support: (888) 839-2700
bankspower.com
©2020 Gale Banks Engineering
Owner’sManual
with Installation Instructions

banks iDash 1.8 Specifications

General

Brand	banks
Model	iDash 1.8
Category	Automobile Parts
Language	English

Summary

Section 1: WIRING

4.Aftermarket ECU wiring

Details on connecting the iDash to aftermarket ECU CAN bus for data.

5. CAN termination

Explanation of CAN bus termination resistors and their installation.

Section 3: ECU CONFIGURATION

3.1: Haltech

Configuration steps for Haltech ECUs to communicate with the iDash 1.8.

3.2: Motec for M400/ M600/M800

Configuration steps for MoTeC M400/M600/M800 ECUs.

3.3: Motec for M84

Configuration steps for MoTeC M84 ECUs.

3.4: Motec for M1

Configuration steps for MoTeC M1 ECUs.

3.5: AEM

3.6: Megasquirt

3.7: Holley EFI

3.8: Link G4

3.9: Edelbrock

3.10: Hondata Kpro/ Kmanager

3.11: Hondata S300/ SManager

3.12: MaxxECU

Section 4: TROUBLESHOOTING

4.1: iDash is not powering on

4.2: No Communication with ECU