Need help?Do you have a question about the Banner American BA-EZ27 and is the answer not in the manual?
Key safety guidelines for operating the laminator and avoiding hazards.
Instructions for unpacking the laminator and assembling its components.
Step-by-step guide for assembling the feed table onto the laminator.
Detailed list of components and their corresponding part numbers.
Procedure for properly loading laminating film rolls onto the mandrels.
Step-by-step instructions for threading the laminating film through the unit.
Guidance on how to clear film that has wrapped around the rollers.
Instructions for cleaning residual adhesive from critical components.
Addresses issues where the laminator does not turn on or indicators are out.
Solutions for when the film and item move inconsistently through the laminator.
Diagnoses and fixes for issues where plastic does not bond properly.
Guidance on resolving wrinkles appearing on the laminated output.
General| Maximum Laminate Width | 27 inches |
|---|---|
| Laminate Thickness Range | 1.5 to 10 mil |
| Temperature Range | Up to 300°F |
| Power Requirements | 120V, 60Hz |
| Weight | 50 lbs |
To Next Page
