Banner American PL135-4 User Manual

Operating
Instructions
Model No.
PL135-4
(120V)
Specifications
Dimensions: 10½” (26.7cm)L x 24½” (62.2cm)W x 3½” (8.9cm)H
Weight: 13½ lbs. (6.2kg)
Power: 120VAC, 50/60Hz, 840 Watts
Width Capacity: 13½” (34.3cm)
Maximum Thickness: 1/16” (2mm)
Film Thickness: 1.5 mil up to 10 mil (37 micron - 250 micron) each side
WARRANTY AND RETURN POLICY
Warranty:
Your laminator is warranted to be free of defects in materials and workmanship
for a period of one year from the date of purchase. In the event of a defect in
material or workmanship, your dealer will (at his/her option) repair or replace the
laminator.
No other warranty is implied except as stated above. This warranty does not cover
damage as a result of misuse, or any special or consequential damage, whether or
not foreseeable.
Return policy:
If your laminator is not operating properly, first review the instructions. If the
malfunction cannot be corrected, contact your dealer for instructions. Be sure to
have your machine serial number and date of purchase handy.
If the laminator must be returned to the dealer, it is your responsibility to ensure it
is packaged properly. Shipping damage as a result of improper packaging is not
covered under the terms of this warranty.
Revised 10/08/98

Banner American PL135-4 Specifications

General

Brand	Banner American
Model	PL135-4
Category	Laminator
Language	English

Summary

Specifications

Warranty and Return Policy

Warranty Details

Details the warranty period, coverage for defects in materials and workmanship, and exclusions.

Return Policy Instructions

Outlines the procedure for returning a malfunctioning laminator, including contacting the dealer and packaging.

Introduction

Operation and Safety

Operating Precautions

Lists essential safety measures to prevent electric shock and damage, including water proximity and cord handling.

Laminating Procedure

Step-by-step guide for using the pouch laminator, from setup to feeding items.

Temperature Adjustment

Increasing Temperature

Instructions on how to adjust the temperature control knob clockwise to increase heat for better lamination.

Decreasing Temperature

Instructions on how to adjust the temperature control knob counter-clockwise to decrease heat for optimal results.