ON-State Saturation: Less than 0.7V at 20 mA
Discrete Output Update Rate
1 second
Discrete Output ON Condition
Less than 0.7V
Output State Following Timeout
De-energized (OFF)
Environmental
Rating
DX80 Models:IEC IP67; NEMA 6; (See UL section be-
low for any applicable UL specifications)
DX80...C Models: IEC IP20; NEMA 1 (In a suitable en-
closure: Class I, Division 2, Group A, B, C, D; T4 −40
to 80° C)
Operating Temperature
−40 to +85° C (Electronics); −20 to +80° C (LCD)
Operating Humidity
95% max. relative (non-condensing)
Radiated Immunity
10 V/m, 80-2700 MHz (EN61000-6-2)
Shock and Vibration
IEC 68-2-6 and IEC 68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10 to 60 Hz
Refer to the SureCross™ DX80 Wireless I/O Network product
manual, Banner p/n 132607, for installation and waterproofing in-
structions. Operating the devices at the maximum operating condi-
tions for extended periods can shorten the life of the device.
Classified Areas Certifications
DX8x...C (External Wiring Terminal Models)
CSA: Class I, Division 2, Groups A, B, C, D (Ex/A Ex nA II T4); Certificate: 1921239
LCIE/ATEX: Zone 2 (II 3G / Ex nA IIC); Certificate: LCIE 10 ATEX 1012 X
Included with Device
The following items ship with the DX80 radios.
Included with Device Model Qty Item
DX80 Access Hardware Kit * BWA-HW-002 4 Plastic threaded plugs, PG-7
4 Nylon gland fittings, PG-7
4 Hex nuts, PG-7
1 Plug, 1/2" NPT
1 Nylon gland fitting, 1/2" NPT
Mounting Hardware Kit BWA-HW-001 4 Screw, M5-0.8 x 25mm, SS
4 Screw, M5-0.8 x 16mm, SS
4 Hex nut, M5-0.8mm, SS
4 Bolt, #8-32 x 3/4", SS
PTFE Tape BWA-HW-003 1
Antenna ** BWA-9O2-C, or
BWA-2O2-C
1 Antenna, 902-928 MHz, 2 dBd Omni, Rubber Swivel RP-SMA
Male, or Antenna, 2.4 GHz, 2 dBd Omni, Rubber Swivel RP-
SMA Male
SureCross Literature CD 79685 1
SureCross DX80 FlexPower Node with Counter Inputs
P/N 136348 rev. G www.bannerengineering.com - tel: 763-544-3164 13
To Next Page
Loading...
