39029 Banzai 7
BLOWER OPERATING INSTRUCTIONS
1. 1 x Inflatable Bouncer
2. 1 x Blower Motor
3. 3 x Blower Motor Ground Stakes
4. 7 x Bouncer Ground Stakes + 1 Extra
5. 1 x Carrying Bag
6. 4 x Repair Patches
7. 3 x Target Toss Balls
8. 1 x Inflatable Soccer Ball
1
5 6 7 8
2 3 4
PART LIST
INTENDED USE:
This product is only to be used for inflating the Jump 'N Games Activity Bouncer™. Household Use only.
WARNING:
1. Electrical current requirements:110-120VAC/60Hz
2. The power supply to the blower motor should include a reliable earth terminal and current leakage
protection device.
3. The power cord to the appliance should be clearly marked, so that persons using lawn mowers or other
types of equipment are aware that there is a cord on the ground.
4. The blower motor should never be left unattended when in use. The appliance is not to be used by children.
5. No objects should cover the air intake when the blower motor is in use. Sand, small stones or other objects
should not be allowed to be sucked into the blower motor.
6. Under no circumstances should a finger or any sharp object be inserted into the air intake.
7. The power supply to the blower motor should not be exchanged for any other type of supply. If the power
supply is damaged, it should be repaired by a technician.
8. To avoid the danger of electrical shock, do not use the blower motor in the rain.
9. Do not use extension cords as this would present an electrocution hazard.
10. Do not leave the blower motor exposed to strong sunlight.
11. Children should not touch the blower motor. Children must not play on the product until the blower motor is
properly installed.
12. Children should not attach foreign objects to the blower motor that are not specifically designed for use
with the blower motor, such as, but not limited to jump ropes, clothesline, pet leashes, cables and chains
as they may cause a strangulation hazard.
13. Sudden gusts of wind may lift the product off the ground.
14. Blower motors and electrical cords should be kept out of reach.
15. The product shall be inflated with the provided blower motor or with another manufacturer-specified
replacement.
INSTALLATION:
1. Place the blower motor on the ground and then secure it by inserting the ground stakes
into the holes in the base.
2. The blower motor should be installed in a well-ventilated location and on a level surface.
3. The air input of the inflatable (the long intake tube) is to be attached to the air output of
the blower motor and secured in place with a cord.
USING THE BLOWER MOTOR:
1. Plug the blower motor into a power supply.
2. To avoid electrical shock, never plug
in or unplug the appliance with wet
hands.
3. The power supply should be
disconnected if the blower motor or
the product needs to be transported
or moved.
4. There is an ON/OFF switch on the
blower motor body. Press “ I ” to
switch on the blower motor, and
press “0” to switch off the blower
motor.
To Next Page
Loading...