Banzai WAVE CRUISER - Product Care and Storage

After Use & Storage
1. Remove the Motorized
Wave Cruiser™ from
the pool.
2. Unlock the controller
unit by pressing the
release button at the
bottom.
3. Unsnap the latches at
the pipe cover and
remove the propeller
unit.
Deflate the Motorized
Wave Cruiser™ and let
it dry thoroughly.
4. Remove all the
batteries and drain
away all the water in
the propeller unit
before storage.
NOTE: Always store
the Motorized Wave
Cruiser™ in a dry
place. Never leave in
the pool or outside
when not in use!
5. When the Motorized
Wave Cruiser™ is
completely dry,
carefully fold it up and
store in a secure
location away from
children. Do not store
indoors or in a closed
container until it is
completely dry.
NOTE: Store Motorized
Wave Cruiser™ in a
secure place, away
from children, to
prevent suffocation.
1.
2.
4.
5.
3.
BANZAI 15733 20121130 8