Baofeng GT-22 - Installing External Headset

Chapter 2 — Getting Familiar
(= R
State Indicator [T
Lamp
PTT Mic/SpkiWrite
Loudspeaker—| Frequency Port
@ +Key
[eH——-key Microphone
Battery Maintenance
Caution
Please use BAOFENG designated battery; other batteries can cause explosions.
Note
1. Do not short-circuit the battery terminals or dispose of in fire. Do not disassemble the battery by
yourself.
2. Charge the battery between temperature 0°C and 45°C. The battery cannot be fully charged beyond
this temperature range.
SAOFENLG 04
3. Turn off the power when you charge the radio.
4. Remove the radio from charger when charging has completed
5. Replace the battery when operating time becomes insufficiently low.
6. Do not charge when the battery or the radio is wet. Please dry it with a cloth before charging to avoid
any danger.
Warning
If conductive metals, such as jewelry, keys or chains, contact the external charging contacts, damage
or personal injury may oceur.
Caution
Be sure the output DC is 5V/1A, when you choose micro USB for charging. Never exceed 1.5A. Itis
also suggested to use the desktop charger while possible.
Installing External Headset
Gently displace (do not remove) the micro/speaker jack cover, insert the headset into the micro/speaker
jack.