1.3 Inspection and adjustment of engine
In order to keep good condition of your truck, you must carry out periodic inspection
and adjustment of power system.
(1) Regularly clear the dust of air cleaner.
(2) Regularly replace oil filter and fuel filter.
(3) Check and apply the coolant periodically.
(4) Periodic inspection of throttle valve and injection pump.
(5) Check fan belt for tension and all fasteners.
Note:
Always check the exhaust gas of the engine during using the forklift truck. Especially
after maintaining the engine, it’s necessary to verify the discharge indicator ensure that
discharge value is fit for the national standard, so as to minimum damage to the person
and environment.
1.4 Fuel system
The fuel system composed with the fuel tank, filter, fuel sensor.
1.4.1 Fuel tank
The fuel tank is a welded construction integrated with the truck frame. It is located
on the left side of the truck frame. The tank cover with a fuel sensor is located on the top
surface of the tank. Once every 600 hours operation, it is required to clean the fuel tank.
Fig.1.3 Fuel tank
To Next Page
Loading...