To Next Page
T
tlopezAug 13, 2025
What to do if the oil temperature is too high in my Baoli CPCD 80 Compact Loader?
- AAshley WhiteAug 14, 2025
If the oil temperature is too high in your Baoli Compact Loader, there are several possible reasons. Begin by checking the oil level and adding oil if necessary. A blocked oil filter can also cause this issue; inspect, clean, or replace it. Also, check the oil for dirt, and replace it if the flywheel is bumping against other parts. Inspect connectors and oil pipes for looseness, tightening them or replacing seals if air is entering. If water has mixed into the oil, replace the oil. Other potential causes include low oil flow (check and replace pipes), worn bearings (check and replace), or a slipped clutch (replace the friction piece of the clutch).
General