Baoli CPCD 80 - Brake System: Operation and Troubleshooting

48
(2) Too higher oil temperature
Parts
Problem
Possible cause and remedy
Torque
converter
1. Lower oil level
Check oil level and add oil.
2. Blocked oil filter
Check, clean or replace.
3. Fly wheel bump against other
parts.
Check oil, if have dirt, replace it.
4. Air entering in resulting
from loose connectors.
Check connectors or oil pipes.
Retighten each connector or
replace seals.
5. Water mixed into oil
Check and replace oil.
6. Low oil flow
Check pipes and replace.
7. Worn bearing
Check and replace.
Gear
box
1. Slipped clutch
Replace friction piece of clutch.
2. Worn bearing
Check and replace.
(3) Noisy gear box
Parts
Problem
Possible cause and remedy
Torque
converter
1. Elasticity plate is broken.
Check noise and replace elasticity plate.
2. Damaged or worn bearing.
Check or replace
3. Gear is broken.
Check or replace
4. Spline is worn
Check or replace
5. Noisy main pump
Check or replace
6. Loosen bolt
Check, tighten or replace
Gear
box
1. Bearing is worn
Check or replace
2. Gear is broken
Check or replace
3. Spline is worn
Check or replace
4. Loosen bolt
Check, tighten or replace