Baracoda D-Fly - Configuring Your Scanner; Reset Your Scanner; Security

Baracoda D-Fly & D-Fly2– User Guide v2.4 - 14 -
Data Capture
for Workforce
in Motion
7. Configuring your scanner
There are two (2) ways to configure your scanner:
• When connected to a host device, the BaracodaManager software can be used for multiple setting
changes
• The Configuration barcodes In the Programming Guide can be used to configure the scanner without
using outside software applications.
7.1. Reset your scanner
To reset the scanner to its “default settings”, use BaracodaManager software or scan the Reset configuration
barcode.
Reset
7.2. Security
The Bluetooth connection is secured with a PIN code authentication.
You can configure security (enable/disable/change PIN code) through BaracodaManager software and through
configuration barcodes.
The Security is enabling by default: default PIN code is 0000.
7.3. Symbology
You can enable/disable any type of barcode decoders with both the BaracodaManager software or with the
Programming Guide.