What to do if my baracuda Swimming Pool Cleaner is not climbing walls?
If your BARACUDA Swimming Pool Cleaner is moving too slowly or not climbing the pool walls, try increasing the Auto Weir Valve setting to medium (2) or high (3).
General| Brand | baracuda |
|---|---|
| Model | tracker |
| Category | Swimming Pool Vacuum |
| Language | English |
Important notice regarding vinyl pool liners and potential damage from cleaner use.
Information on getting assistance with setup, installation, and troubleshooting the cleaner.
Lists all components included in the BARACUDA Tracker cleaner's package.
Steps to prepare the pool system and ensure optimal cleaner performance.
Details on installing the AD Flow Valve based on different skimmer box types.
Instructions on connecting the cleaner hose sections together correctly for pool coverage.
Steps for connecting the cleaner head and re-connecting the hose to the skimmer box.
Method to verify and adjust the cleaner's water flow for optimal cleaning efficiency.
Instructions on safely disconnecting the cleaner head from the hose when removing it.
Steps for backwashing the pool filter while the cleaner is disconnected.
Precautions for removing the cleaner when adding pool chemicals to prevent damage.
Guidelines for storing the cleaner, especially during winter, to prevent damage.
Step-by-step guide to safely remove debris from the cleaner's engine compartment.
Solutions for when the cleaner is not moving or moving too slowly.
Tips for ensuring the cleaner covers the entire pool area effectively.
Advice on how to prevent or resolve the cleaner getting stuck at pool steps.
Solutions for the cleaner failing to climb pool walls.
Guidance on adjusting the cleaner if it climbs excessively.
To Next Page
