• In transit, some parts of the appliance may have moved from their original
place. Check that the door opens and closes, the brake plate is tted
correctly to the brackets at the top of the re, the side panels are xed to the
walls and the panels on the bottom have not moved. Check whether the grate
is lying correctly and there are no foreign objects in the ashtray.
• Avoid over-loading (white burning glow), caused, for example, by lengthy
burning with primary air (combustion air supply slider all the way to “ + ”)
or by burning too much wood in one go. The stove can then become over-
heated.
This may damage the grate and the metal ue gas ap (ECO 60).
• Consult the current local building regulations before starting the assembly.
To Next Page
Loading...