Getting Started
Your Barbie
™
-On the Go Learning Phone operates on
1 CR2032 battery (included).
Battery Installation
1) Make sure the unit is turned off.
2) Using a small screwdriver slide
back the locking catch. Tip the
unit and the battery cover will
drop out. It may require
assitance from a fingernail.
3) Insert the CR2032 battery,
taking careful note of the correct
polarity. Try not to handle the
battery too much.
4) Replace the cover and slide the
locking catch back with a small
screwdriver.
Caution
• Only use batteries of the same or equivalent type.
(CR2032)
• Remove batteries from the unit if the unit is not going
to be used for a long time.
• Remove all batteries when replacing.
• Do not dispose of batteries in fire.
• Non-rechargeable batteries are not to be recharged.
¥ Rechargeable batteries are to be removed from the toy
before being charged.
To Next Page
Loading...
