Connecting to
the internet
Setup
Wizard
Setting up
the printer
What’s in the
box and getting
started
Connecting
to Bluetooth
Safety information
General use
ALWAYS read the safety information and keep this guide
in a safe place. Heed all warnings, and follow these
instructions carefully before use.
DO NOT attempt to insert any sharp objects into the device,
or use them to operate it – they may scratch or damage
the product.
DO NOT place the device on an uneven surface.
ALWAYS consider the device placement and cables
connected to the device to ensure a safe working
environment.
DO NOT use harsh chemicals, cleaning solvents or
detergents to clean the product. Wipe with a dry, soft cloth
or tissue paper to clean. Disconnect the product from the
electrical outlet before cleaning.
DO NOT shove any foreign objects into the product or ports.
NEVER place any objects on top of the product, or on top of
the display, as this may damage the product.
DO NOT attempt to open the product casing.
This product does not contain any user serviceable parts.
Unauthorised handling of the device may damage it and will
void your warranty.
DO NOT expose the product to strong magnetic or
electrical fields.
NEVER use your product, and always disconnect your
product from the mains power supply, during an
electrical storm.
ALWAYS disconnect your product from mains power supply
if not being used for a significant period of time.
SAFE TEMPERATURE: This product should only be used in
environments with ambient temperatures between 0°C and
40°C. It is advised not to use the product in any extreme
cold or heat environment.
CAUTION: This product has some metal parts to
disperse heat.
ALWAYS keep the product away from heat sources such as
radiators, heaters and other appliances which produce heat.
DO NOT leave the product in high temperatures as
electronic devices and plastic parts may warp in heat.
INPUT RATING: Refer to the rating label on the product
and be sure that the power adapter complies with it. Only
use the power adapter that came with the product. Using
an unauthorised power supply will invalidate your warranty
and may damage the product beyond repair.
ALWAYS check the connections between any peripheral and
the product before powering on.
DO NOT insert anything into the product that may result in
short circuiting or damaging it.
ALWAYS handle the product with care to avoid damage.
CAUTION: This product should never be immersed in water,
used in a humid environment, and should be protected
against any water jets.
DO NOT expose the product to any chemical substances.
DO NOT use this product near medical devices.
CAUTION: Disconnect mains power in the event of any
abnormal smell or smoke emitting from the product.
NOTE: No one is entitled to modify or change the product in
any way, unless permitted by the company.
Smartpay Hub
features
Printer
loading
Supported
peripherals
Safety
information
Technical
information
Recycling
Always return your used electronic products, batteries,
and packaging materials to dedicated collection points.
This way, you help to prevent uncontrolled waste disposal
and promote the recycling of materials. All materials of the
device can be recovered as material and energy.
DO NOT throw the product in municipal waste. Check local
regulations for disposal of electronic products.
Disposal of Waste Electrical & Electronic Equipment (WEEE).
This symbol, on the product or on its packaging, indicates
that this product should not be treated as household
waste. Instead, it should be handed over to a suitable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. The recycling materials will help to
conserve natural resources. For more information about the
recycling of this product, please contact your local council
office, your household waste disposal service or where you
purchased the product.
Electrical Safety Information
Compliance is required with respect to the voltage,
frequency, and current requirements indicated on the
manufacturer’s label. Connection to a different power
source than those specified herein will likely result in
improper operation,damage to the equipment, or pose a
fire hazard if the limitations are not followed.
There are no operator serviceable parts inside this
equipment. There are hazardous voltages generated by this
equipment which constitute a safety hazard. Service should
be provided only by a qualified service technician.
Contact a qualified electrician or the manufacturer if there
are questions about the installation, prior to connecting the
equipment to mains power.
Emissions and Immunity Information
Notice to Users in the European Union: Use only the
provided power cords and interconnecting cabling provided
with the equipment. Substitution of provided cords and
cabling may compromise electrical safety or CE Mark
Certification for emissions or immunity as required by
the following standards: This Information Technology
Equipment (ITE) is required to have a CE Mark on the
Manufacturer’s label which means that the equipment has
been tested to the following Directives and Standards: This
equipment has been tested to the requirements for the CE
Mark as required by EMC Directive 2014/30/ EU as indicated
in European Standard EN 55032 Class A and the Low Voltage
Directive 2014/35/EU as in European Standard EN 60950-1.
Trademarks
Manufactured by Epos Now, 2 Whiting Road, Norwich
Business Park, Norwich, England, NR4 6DJ.
Epos Now, and the Epos Now logo are trademarks or
registered trademarks of Epos Now Limited.
11
To Next Page
Loading...