Connecting to
the internet
Setup
Wizard
Setting up
the printer
What’s in the
box and getting
started
Connecting Smartpay Hub
features
Technical
to Bluetooth
Printer
loading
information
Supported
peripherals
Safety
information
Setting up the printer
1) Your printer is built-in. To set
this up, open the side menu
at ‘Till’ and go to ‘Settings’.
Then select the cog next to
‘App settings’.
2) A new page – ‘Settings’ – will
appear. Under ‘Receipt printer’,
choose ‘Set up printer’.
3) A pop-up will appear. In the
dropdown, select ‘T80 Built in’.
4) Your printer name should
appear. Choose that and
press ‘OK’.
You can test the printer on the
‘App settings’ page.
6
To Next Page
Loading...