Do you have a question about the Barco S3 series and is the answer not in the manual?
Power Supply | 100-240 VAC, 50/60 Hz |
---|---|
Input Interfaces | HDMI, SDI, DisplayPort |
Output Interfaces | HDMI, SDI, DisplayPort |
Supported Resolutions | Up to 4K/UHD |
Color Depth | Up to 12 bits |
Audio Support | Embedded audio |
Operating Temperature | 0°C to 40°C |
Storage Temperature | -20°C to 60°C |
Humidity | 0-95% non-condensing |
Clarifies the meaning of "S3 series" for Barco products labeled NGS-3U.
Lists the specific Barco products included in the S3 series documentation.
Provides details about the Safety Guide and where to find other documents.
Outlines essential instructions for safe operation and adherence to warnings.
Warns about battery explosion risk and proper disposal methods.
Advises against placing the equipment on unstable surfaces to prevent damage.
States that only trained technicians should install the S3 series screen management system.
Mandates installation in a dust-free environment to protect the system.
Advises that troubleshooting should only be performed by qualified technicians.
Highlights that the S3 series system is fragile and requires careful handling.
Ensures air inlets/outlets are free and recommends dust prevention measures.
Advises against installing near heat sources, direct sunlight, or excessive dust/humidity.
Details the NEMA 5/15 plug type, its rating, and wire color coding.
Details the GB 2099 plug type, its rating, and wire color coding.
Details the CEE 7 plug type, its rating, and wire color coding.
Lists the international safety standards (IEC, EN, UL, CSA) the equipment adheres to.