EasyManua.ls Logo

Barford SR124 - General Safety Recommendations; Safe Machine Operation; Chemical Safety Precautions; High Pressure Fluid Safety

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
MODEL SR124
8
The Barford Screener is designed with Safety in mind.
Barford Equipment Ltd reserve the right not to take responsibility for any injury or damage if the manual is not read and
followed.
Ensure all operators are familiar with the machine, its functions and capabilities. Inadequate knowledge of the machines
operation can lead to death or serious injury. Before commencing any maintenance work ensure that all energy sources i.e.
Diesel Engine or Electric Power pack are locked out using the isolators provided and signs are in place indicating that
maintenance work is being carried out.
Ensure the machine cannot be started while others carry out work on the machine by locking out all energy sources.
All moving parts are covered by guards and shields to prevent accident or injury. If in the event of repair work or servicing to be
carried out, these covers may be removed. Removed guards and shields should be replaced immediately after maintenance work
is finished.
Operating the machine is not permitted with missing guards.
Ensure machine is operated and driven on a level and stable surface.
OPERATING MACHINE SAFELY
Read the operators manual carefully taking note of all the safety information.
DO NOT attempt to adjust the conveyor belt while they are running.
If excessive machine vibration occurs, stop the engine and remedy the problem.
CHEMICAL SAFETY
Always follow instructions on chemical container
Protective clothing should be worn when using chemicals (gloves and goggles).
Use the appropriate tools when opening a chemical container.
Always use a well ventilated area.
DO NOT smoke, eat or drink while handling chemicals. Dispose of all waste in line with local and national regulations.
HIGH PRESSURE FLUIDS
Check all hoses and lines regularly. Replace when needed.
Check all connections and tighten when needed.
Always relieve pressure if fluid escapes before disconnecting hydraulic hose or lines.
DO NOT use your bare hands or parts of the body to check for leaks.
Always seek medical help if an accident occurs.
4) SAFETY RECOMENDATIONS