baridi DH238 - Page 5

5
• Step 2.
• Then put the loading bowl into the ice cream machine,
both ends of the loading bowl handle shall be aligned
with the groove of the upper cover.
• Step 4.
• Install the mixing fan blade.
• Step 3.
• Install the transparent lid and motor assembly.
• Step 5.
• Put the components installed in step 4 into the ice cream
machine.
• Make sure that the centre of the convex hull of the loading
bowl and the motor components of the mixing fan
blade are inline, lock the components clockwise, and make
sure that the triangle mark on the components rotates to the
“LOCK” mark.
• Step 6.
• Plug in the power supply, press the Power button, the
 machinestarts,theicecreammodeiconashes,pressthe 
Start/Stop button, the ice cream mode icon will light up and
the ice cream program will start.
• Step 7.
•  Whentheicecreamprogrammehasnished,touchthe 
power button and the machine will shut down.
• To make an ice cream:
• Step 1.
• Pour the prepared recipe ingredients in proportion into the removable bowl.
• Make according to the following formula. (Ice cream will be made within 60 minutes).
• Cream: 180g
• Powdered Milk: 120g
• Water: 200g