barigo PENTA - Page 9

Watch mode
BARIGO
–
Makes
the
Difference
9
Pressing the following buttons has the following functions in the
watch mode:
S1
–
press and hold to set the time
S2
–
to go to the altimeter mode
S3
–
to go to the compass mode
S4
–
to go to the alarm m
ode
S5
–
to go to the weather forecast
Setting the time
The following steps are required for setting the time in the watch
mode:
1.
Press the
S1
button for two seconds until you hear a double
signal tone.
The minute hand in
A1
will change to the 12
-
o’cloc
k
position, while the second hand
A5
will move to the 60 second
position.
–
Continue with point 3.
2.
If the second hand does not automatically move to the 60
-
second position (12 o'clock), press the
S2
button in order to m
a-
nually move it to this position
(to
move forward faster = keep