barigo PENTA - Page 10

PENTA
Watch mode
10
pressing
S2
, to move forward in seconds = press
S2
repetitiv
e-
ly
).
3.
Press the
S1
button (single signal tone) for the next step.
4.
Press the
S2
button for AM or PM.
5.
Press the
S1
button (single signal tone) for the next step.
6.
Press the
S2
button to set the current time.
To move quicker,
hold
S2.
7.
Press the
S1
button (double signal tone) to complete the se
t
ting
mode for the time.
The BARIGO PENTA automatically leaves the setting mode if no
button is pressed for 2 to 3 minutes.
We recommen
d moving the
second hand in the setting mode to the 60
-
second position to get an
exact time setting.
Tip:
We recommend setting the BARIGO PENTA to a time signal (for example,
radio or television).
Prepare for the time setting of your BARIGO PENTA so that
you just have to press the
S1
button to complete the setting mode when the
time signal rings in the radio or television (normally on the hour).