Barko 295B - Page 30

13-8
®
INSPECT & SERVICE SCHEDULE (continued...)
Fire Extinguisher- inspect
X
see fire prevention section
(chapter 10)
Seat Belt-
check integrity
X
Emergency Escape(s)-
check
X
Under Seat A/C Pleated
Filter- inspect / replace
X X
inspect & clean every 100
hours, replace yearly
Under Seat A/C Mesh Filter-
inspect / replace
X X
inspect & clean every 100
hours, replace yearly
Swing Gearbox(s)- check oil
level
X
add fluid if necessary, see
gearbox service section
(chapter 43)
Swing Gearbox & Motor
Mtg Bolts- check torque
X X
check after initial 100 hours
and every 1000 hours
thereafter
Turntable Bearing Open
Gear- lubricate
X
see turntable bearing service
section (chapter 43)
Turntable Bearing
Mounting Bolts- check
torque
X X
check torque after initial 50
hours and every 100 hours
thereafter, see turntable
bearing service section
(chapter 43)
Swing Gearbox(s)- change
oil
X X
change after initial 50 hours
and every 500 hours thereafter
Turntable Bearing Seals-
inspect for wear / damage
X
see turntable bearing service
section (chapter 43)
Turntable Bearing Internal
Bearing- lubricate
X
see turntable bearing service
section (chapter 43)
Swing Grearbox(s) Internal
Gears & Bearings- inspect
X
see gearbox service section
(chapter 43)
Turntable Bearing Tilt-
check clearance
X
check every 700 hours or
yearly, whichever comes first,
see turntable bearing service
section (chapter 43)
***see attachment manual(s) for manufacturer guidelines***
43 Platform
40 Cab
35 Attachments
Daily 50 Hours 100 Hours 500 Hours 1000 Hours 2000 Hours 4500 Hours 5000 Hours Yearly 2 Years 3 Years 4 Years
INTERVAL
NOTES /
INSTRUCTIONS
CHAPTER REF
LOCATION
/ SYSTEM
INSPECTION &
SERVICE REQUIRED
07/26/2018
Updated
OPERATOR’S