40-19
Md3 DIAGNOSTIC SCREEN
Important Safeguards
1. Be sure the connect the color coded leads according to the diagram. Incorrect connections may cause
the unit to malfunction or damage the vehicle's electrical system.
2. Be sure the connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right
channel speaker cables each other or the vehicle body.
3. Make sure all the connections are completely correct before turning on your unit.
4. When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse
holder.
5. Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in
fire.
6. After completing the installation and beginning to play the unit(including replacing the battery), please
remove the front panel at first, and then press RESET button on the base with pointed object (such as ball-
point pen) to set the unit to initial status.
08/20/2018
Updated
OPERATOR’S
To Next Page
Loading...