Baroness GM2810 - Introduction to GM2810 Service Manual; Warning Symbols in Manual

This manual describes about the procedures of maintenance and malfunction diagnosis etc. of this machine.
Items of description are categorized per system for representative maintenance contents.
As for repair items specified by the manufacturers in the hydraulic system, engine, etc., their respective
disassembling and maintenance procedures are not described.
For repair, please contact your sales dealer or Kyoeisha.
For operation, handling and adjustment instruction, please refer to the Owner's Operating Manual.
Be sure to also read the Owner's Operating Manual for the engine, battery, etc.
See the parts catalog for required parts.
Kyoeisha Co., Ltd.
Caution
The information described in this manual is subject to change for improvement without prior notice.
When replacing parts, be sure to use genuine Baroness parts or parts designated by Kyoeisha.
Note that the Baroness product warranty may not apply to defects caused by the use of parts from other
companies.
Warning Symbols
This manual uses the following warning symbols for handling precautions that are important for your
safety.
696cq5-001
Warning symbol
This symbol indicates the articles regarding “Danger,” “Warning,” or “Caution.”
Those articles describe important safety precautions and so read them carefully to understand completely before
operating the machine.
Failure to adequately follow these safety precautions may cause an accident.
Danger
Danger
This symbol indicates that serious injury or death will occur if the warning is ignored.
Warning
This symbol indicates that serious injury or death may occur if the warning is ignored.
Caution
This symbol indicates that injury or damage to property may occur if the warning is ignored.
Important
This symbol indicates precautions on the mechanism of the machine.
GM2810
Introduction