Baroness LM551 - User Manual

5-Unit Reel Mower
Owner's Operating Manual
Serial No. LM551：10087-
"Required reading"
Read this manual before using the machine.
Original Instructions Ver.1.3

Summary

Introduction

Warning Symbols

Explains danger, warning, caution, and important symbols used in the manual.

Precautionary Statement

Information subject to change, use of genuine parts, manual references.

Purpose

States the intended use of the product and restrictions.

Safety

Safe Operating Practices

General guidelines for safe operation.

Training

Emphasizes the importance of training and instruction for operators.

Preparation

Steps to evaluate terrain, wear protective gear, and inspect the area.

Fuel Handling Precautions

Precautions for storing, refueling, and handling fuel safely.

Operation Guidelines

Guidelines for operating the machine safely, including starting and stopping.

Maintenance and Storage

Procedures for safe maintenance and storage of the machine.

Disposal

Recycle and Waste Disposal

Information on recycling and proper disposal of waste.

About Recycle

Recommendation for recycling.

About Waste Disposal

Guidelines for disposing of waste according to regulations.

Product Overview

Specifications

Key technical data and measurements of the machine.

Names of Each Section

Identifies and labels major components of the machine.

Regulation Decals

Details about regulatory markings and their purpose.

Positions of Regulation Decals

Shows the location of various regulation decals on the machine.

Serial Number Plate

Identifies the model and serial number of the machine.

Specification Decal

Details CE marking, model, and weight.

Noise Emission Decal

Indicates sound power level as per EC directives.

Year of Manufacture Decal

Shows the year the machine was manufactured.

ROPS Compliance Decal

Indicates compliance with ISO 21299:2009 for ROPS.

ROPS Caution Decal

Provides caution messages regarding ROPS.

Safety Signs and Instruction Decals

Information on safety decals and instruction signs for safe operation.

Battery Capacity Decal

Indicates battery capacity (20HR and CCA).

Recycle Decal

Illustrates the Recycle Mark according to local regulations.

Positions of Safety Decals and Instruction Decals

Shows the location of safety and instruction decals on the machine.

Decal for operation 2

Explains the 'Decal for Operation 2' and its instructions.

Caution to Rotating Object Decal

Explains the 'Caution to Rotating Object Decal' and its warning.

Caution for Mower Lock Decal

Instruction for locking mower units.

Caution to Getting Pinched Decal

Warning about pinch hazards.

Caution to Hot Parts Decal

Warning about hot parts.

Caution to Injury Decal

Warning about potential injuries.

Handling Instructions

Inspections

Procedures for inspecting various components of the machine.

Radiator Cover

Inspection and cleaning of the radiator cover.

Radiator

Inspection and cleaning of the radiator.

Coolant

Inspection of the coolant level and condition.

Coolant Supply

Procedures for supplying coolant to the system.

Oil Cooler

Inspection and cleaning of the oil cooler.

Hydraulic Oil

Inspection of the hydraulic oil level.

Air Cleaner

Inspection and cleaning of the air cleaner element.

Battery

Inspection of the battery condition and fluid level.

Tire

Inspection of the tires for pressure, cracks, and wear.

Brake

Inspection of the brake system's effectiveness.

Belt

Inspection of the belt for tension and condition.

Wire

Inspection of wires for damage.

Around The Engine

Inspection of engine-associated parts like fuel system and muffler.

Engine Oil

Inspection of engine oil level and condition.

Fuel

Inspection of fuel quantity in the tank.

Air Bleeding of Fuel System

Procedure for bleeding air from the fuel system.

Water Separator

Inspection of the water separator for debris and water.

Draining of Water Separator

Procedure for draining water from the separator.

Fuel Filter

Inspection of the fuel filter.

Oil Leakage

Inspection for oil and grease leaks.

Grass Catcher

Inspection of the grass catcher for wear and damage.

Tightening Torques

Specifies torque values for bolts and nuts.

Standard Tightening Torques

General torque specifications for bolts and nuts.

Principal Tightening Torques

Specific torque values for various machine parts by model.

Adjustment before Work

Steps for adjusting machine components before operation.

Adjustment of Steering Wheel

Adjusting the steering wheel position for operator comfort.

Adjustment of Seat

Adjusting the seat position for operator comfort.

Adjustment of Reel Rotation Control Valves

Adjusting reel cutter rotation speeds for optimal mowing.

Adjustment of Mower Stopper Pin

Adjusting the mower stopper pin to control mower unit tilting.

Adjustment of Mower Stabilizer

Adjusting the mower stabilizer for an even finish.

Adjustment of Stopper Nuts

Adjusting stopper nuts to control mower unit movement range.

Procedure to Start;Stop Engine

Instructions for starting and stopping the engine safely.

Start;Stop of Engine

Step-by-step instructions for starting and stopping the engine.

Safety Mechanisms

Safety features preventing unintended starting or stopping.

Warning Mechanisms

Systems that alert the operator to potential issues.

Operation Method

Guidelines for operating the machine controls and features.

Cautions for when You Leave The Machine

Safety precautions when leaving the machine unattended.

Positions of Operation Decals

Identifies the location of operation-related decals on the panel.

Key Switch Decal

Indicates the positions of the key switch.

Engine Rotation Decal

Indicates high/low speed of the engine rotation.

Light Switch Mark

Illustrates ON/OFF positions for the lights.

Reel Rotation Mark

Illustrates rotation/stop for the reel cutter.

Mower Unit Up;Down Decal

Indicates the Up/Down positions of the mower unit.

Traveling;Working Selector Switch

Selects traveling or working mode, affects mower unit #4/#5 position.

Tilt Steering Decal

Illustrates steering wheel tilt directions and lock/free positions.

Parking Brake Decal

Shows how to lock and release the parking brake.

BRAKE Decal

Indicates the brake function.

FORWARD Decal

Indicates forward travel.

BACKWARD Decal

Indicates backward travel.

Driving Mode Shift Decal

Indicates high/low speed driving modes.

Lever Open;Close Decal

Indicates lock/release of the open/close lever.

Lapping Decal

Indicates rotational direction of the reel cutter.

Reel Rotation Decal

Indicates rotation of the reel cutter.

Reel Stop Decal

Indicates stop of the reel cutter.

Proximity Sensor

Detects mower unit positions for rotation and stop control.

Relays

Controls traveling, rotation, and mower unit selection via LEDs.

Light Switch

Controls auxiliary lighting ON/OFF.

Traveling;Working Selector Switch

Selects traveling or working mode, affects mower unit #4/#5 position.

Reel Rotation Switch

Controls rotation of the reel cutters.

Reel Forward;Reverse Switch

Switches rotation direction of the reel cutters.

Reel Rotation;Stop Switching Lever

Lever for controlling reel rotation on individual mower units.

Mower Lock Lever (Latch)

Secures raised mower units #4 and #5 for travel or storage.

Mower Unit Up;Down Lever

Lever to raise or lower the mower units.

Throttle Lever

Adjusts engine RPM.

Traveling Pedal

Controls forward and backward movement of the machine.

Pedal Stopper

Limits forward pedal depression to control speed.

Brake Pedal

Controls braking and parking.

Open-Close Lever

Used for opening and closing the underseat cover.

Radiator Cover

Instructions for opening and closing the radiator cover.

Hood

Instructions for opening and closing the hood.

Underseat Cover

Instructions for opening and closing the underseat cover.

Instruments

Identifies instruments on the operation panel.

Water Temperature Gauge

Indicates engine water temperature.

Fuel Gauge

Indicates the quantity of fuel in the tank.

Pilot Lamps

Indicates status via charge, thermo-start, and oil pressure lamps.

Thermo-Start Lamp

Indicates glow plug operation for starting.

Oil Pressure Lamp

Indicates engine oil pressure status.

Hour Meter

Indicates accumulated engine operation time.

Travel of Machine

Procedures for moving the machine.

Traveling Procedure

Steps for safely moving the machine.

Towing The Machine

Procedures for moving the machine when it cannot travel under its own power.

Cutting Work

Instructions for performing cutting operations safely and effectively.

Removal;Installation of Grass Catcher

Procedures for removing and installing the grass catcher.

Transporting

Procedures for transporting the machine.

Transporting Procedure

Steps for loading and securing the machine for transport.

Storage

Guidelines for storing the machine.

Before Long-Term Storage

Procedures to prepare the machine for long-term storage.

Maintenance

Maintenance Precautions

Important safety and procedural guidelines before performing maintenance.

Maintenance Schedule

A schedule outlining regular maintenance tasks and intervals.

Adjusted Value

Specific values for adjustments mentioned in the manual.

Jacking Up The Machine

Safe procedures for lifting the machine.

Jack-Up Points

Specific points on the machine for safe jacking.

Greasing

Instructions and points for greasing moving parts.

Greasing Points

Locations where grease nipples are installed.

Lubrication

Instructions and points for applying lubricant.

Lubricating Points

Locations requiring lubricant application.

Maintenance Work

Detailed procedures for various maintenance tasks.

Swiveling Mower Units #2 and #3

Procedures for swiveling mower units for maintenance access.

Removing;Installing Tires

Procedures for removing and installing tires.

Adjustment of Belt Tension

Procedures for adjusting belt tension.

Adjustment of Parking Brake

Adjusting the parking brake for proper engagement.

Adjustment of Brake

Adjusting the service brake for effectiveness.

Adjusting The Neutral Position of The Piston Pump

Adjusting the piston pump for neutral position.

Adjustment of Control Arm

Adjusting the control arm position for the operator.

Adjustment of Stoppers

Installing and adjusting stoppers for mower units.

Adjustment of Mower Unit Leveling Spring

Adjusting leveling springs for mower units.

Adjustment of Positions of Mower Units #2 and #3

Adjusting the sliding position of mower units #2 and #3.

Adjustment of Mower Stopper

Adjusting mower stoppers for mower unit #1.

Adjustment of Mower Stoppers for Mower Unit #2 and #3

Adjusting mower stoppers for units #2 and #3 based on model.

Adjustment of Mower Stoppers for Mower Unit #4 and #5

Adjusting mower stoppers for units #4 and #5 based on model.

Change of Coolant

Procedures for draining and refilling the coolant.

Change of Hydraulic Oil

Procedures for draining and refilling hydraulic oil.

Change of Hydraulic Oil Line Filter

Procedures for replacing the hydraulic oil line filter.

Change of Hydraulic Suction Filter

Procedures for replacing the hydraulic suction filter.

Change of Air Cleaner

Procedures for replacing the air cleaner element.

Change of Engine Oil

Procedures for changing the engine oil.

Change of Engine Oil Filter

Procedures for changing the engine oil filter.

Change of Fuel Filter

Procedures for replacing the fuel filter.

Change of Fuse

Procedures for checking and replacing fuses.

Fuse Box

Information about the fuse box and its contents.

Baroness LM551 Specifications

General

Brand	Baroness
Model	LM551
Category	Lawn Mower
Language	English