Barracuda CloudGen Firewall
Barracuda NG Firewall F600 Revision C 4 / 8
Networks Appliance Safety Instructions
Component
Specifications
(Sub-Models .C10 and
.F10)
Specifications
(Sub-Models .C20 and
.F20)
Specifications
(Sub-Model .E20)
CPU Intel Quad Core
Memory 8 GB
Mass Storage 160 GB SSD 160 GB SSD 300GB SSD
LCD Module 2 x 20 characters
USB 2x USB 2.0
Form Factor 1U rack mount
Dimensions (W/D/H)
427 x 450 x 44 mm
17 x 17.7 x 1.7 in
Weight appliance 7 kg / 15.4 lbs
Power Supply Single, internal Dual, internal Dual, internal
Power Supply Input Voltage 100 - 240 V, AC
Power Supply Voltage 50 Hz - 60 Hz
Power Supply Watts 250 W
Storage Temperature -20 °C - +60 °C
Operation Temperature 0 °C - 40 °C
Relative Humidity 5% - 95%, non-condensing
Certifications CE, FCC, ROHS
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological progress. Therefore, the list may not reflect the current
hardware configuration of the Barracuda Networks NG Firewall or NG Control Center appliance it
was delivered with.
Status LEDs and Acoustic Signals
Your appliance is equipped with a variety of LEDs. One of them is the Status LED. It is either
labeled with a heart symbol or the term Status. It indicates the appliance’s operational state by
changing colors between green, orange and red and by changing between blinking and steady
glowing. The table below shows the different meanings of the different glowing states.
To Next Page
Loading...