To Next PageTo Next Page
Need help?Do you have a question about the Barreto E1320H and is the answer not in the manual?
Replace hydraulic oil filter after the first 50 hours and every 200 hours thereafter.
Check tine bolts after each use and tighten, check hydraulic fittings for leaks.
Grease tine shaft bearing every 4-8 hours and wheel hubs weekly.
Barreto warrants equipment to be free of defects for one year from delivery.
Engines, wear parts, and service call times are excluded from warranty.
Tracks machine hours for routine maintenance and recommends frequent oil changes.
Procedure to reset the service interval using the RESET TOOL.
Illustrates wiring for Honda GX390 with Oil Alert and electric starter types.
Provides the electrical wiring diagram for the Briggs Vanguard 16 HP V-Twin engine.
Visual representation of the tiller's hydraulic system components and flow.
Details physical dimensions and weight of the tiller model.
Information on engine options, power, and fuel capacity.
Specifies hydraulic reservoir capacity and operational speeds.
Troubleshooting steps for unresponsive hydraulic systems.
Diagnosing issues when tines fail to rotate but wheels move.
Troubleshooting when wheels do not move but tines rotate.
Addressing engine lugging or stalling with tines/wheels not turning.
Identifying and fixing sources of hydraulic oil leaks.
Troubleshooting excessive hydraulic oil foaming from the vent hose.
Ensure fluid levels are correct and controls are understood before starting.
Instructions for using clutch, wheel drive, and tine drive levers.
Steps for engaging tines, controlling speed, and adjusting depth.
Warnings against reverse operation with tines rotating and operating on inclines.
Do not leave unattended, park on level surfaces, use caution on inclines.
Wear safety goggles, hard hat, hearing protection, boots, and gloves.
Warnings about rotating tines, buried utilities, fuel fumes, and hot components.
Product contains chemicals known to cause cancer or birth defects.
Emphasis on clutch lever, common sense, and avoiding moving parts.
Dangers from buried utilities, fiber optics, and engine exhaust.
Proper clearances, lighting, keeping others away, and parking.
Warnings about inclines, flammable atmospheres, hot parts, and hydraulic fluid.
OSHA requirement to determine utility locations before excavation.
Call 1-888-258-0808 to locate underground utilities before tilling.
Understanding international marking codes for underground facilities.
Examine work area for obstructions, hazards, and signs of underground placements.
Warnings about engine exhaust, flammable vapors, and maintaining clearances.
Verify that safety features like the clutch lever function correctly.
Steps to take if a wire, cable, or pipe is accidentally struck.
Dangers of electric shock and gas explosions from severed utilities.
Warning about potential eye injury from laser light in fiber optic cables.
General
