Barreto 1320H User Manual

1320 owners manual.doc 4/22/08 page 1 of 10
THE
MODELS 1320H & 1620B
HYDRAULIC REAR TINE TILLERS
CONGRATULATIONS!
You are now the proud owner of the BARRETO Model 1320 or 1620 tiller. Please take a
moment of your time to look over the following information. Familiarize yourself with the tiller,
its characteristics, and method of operation. Pay particular attention to the safety and operating
instructions.
If you have any questions or need any replacement parts in the future, please contact us at your
convenience. Our toll-free phone number, fax and email are listed below.
THANK YOU for your patronage and confidence in BARRETO equipment.
Barreto Manufacturing, Inc.
Innovative Equipment Engineered to Last
66498 Hwy 203, La Grande, OR 97850
(800) 525-7348 (541) 963-7348
FAX (541) 963-6755
E-Mail: info@barretomfg.com
Web Site: http://www.barretomfg.com

Barreto 1320H Specifications

General

Tilling Depth	12 inches
Number of Forward Speeds	1
Number of Reverse Speeds	1
Tine Count	16
Handle Material	Steel
Tine Material	Steel
Fuel Capacity	3.1 liters
Tilling Width	20 in (50.8 cm)

Summary

Introduction and Contact Information

Assembly Instructions

Service Information

Break In Procedure

Procedure for initial machine run-in to ensure proper operation and prevent damage.

Operating Instructions

Safety Instructions

Equipment Warranty

Trouble Shooting Guide

A. ENTIRE HYDRAULIC SYSTEM DOES NOT OPERATE AND THE ENGINE IS NOT UNDER LOAD

Diagnosing hydraulic system failures when the engine is not under load.

B. TINES FAIL TO ROTATE BUT WHEELS DRIVE.

Troubleshooting issues where tines are not rotating but wheels are driving.

C. WHEELS FAIL TO TURN BUT TINES ROTATE

Troubleshooting issues where wheels do not turn but tines are rotating.

D. ENGINE LUGS DOWN OR DIES AND WHEELS AND TINES DO NOT TURN.

Diagnosing engine issues when wheels and tines fail to operate.

E. OIL LEAKS IN HYDRAULIC SYSTEM.

Identifying and resolving hydraulic oil leaks within the system.

F. EXCESSIVE FOAMING OF HYDRAULIC OIL FROM VENT HOSE.

Addressing excessive hydraulic oil foaming from the vent hose.

Tine Drive Hydraulic Motor Service

Reinstallation of Tine Drive Hydraulic Motor

Procedure for reinstalling the tine drive hydraulic motor.