Bartec Agile S NI - Copy the Operating System on the USB Stick

Agile S / Agile S NI
Installation manual: bootable USB stick for Windows 10 LTSC 1809
Installation manual
Subject to technical changes.
03/2022
6/7
5. Copy the operating system on the USB stick
1. Run the latest Rufus application “rufus-3.17.exe”.
2. Make the following settings in the "Drive Properties":
 Device: RDVD (D :) [16GB]
 Boot selection: AgileSNI-LTSC2019-OEM.iso
 Partition scheme: MBR
 Target system: BIOS (or UEFI-CSM)
3. Make the following settings in the "Formatting Options":
 Volume label: DVD_ROM
 File system: NTFS
 Cluster size: 4096 Byte (Standard)