EasyManua.ls Logo

Bartec POLARIS Panel PC 19.1" - 7 Installation Additional Components; Connection of Ex I Keyboard to the POLARIS Panel PC; Connection of BARTEC USB Ex I Memory Stick; Connection of USB CD Rom Drive

Bartec POLARIS Panel PC 19.1"
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User manual
POLARIS Panel PC 19.1'' and Panel PC 15''
Version 2.00 Page 31 of 46
E_BMS790_POLARIS_PanelPC_19+15_Rev1.doc User manual for POLARIS Panel PC 19.1" and 15" Revision 1 / Status: January, 3
rd
, 2006 Technical data subject to change
7. Installation additional components
7.1 Connection of Ex i keyboard to the POLARIS Panel PC
Make the connection between the POLARIS Panel PC and the Ex i keyboard.
Connection via connecting cable, longer than approx. 1.80 m
- Keyboard and mouse Type 05-0068-0163
- Keyboard and trackball Type 05-0068-0172
- Keyboard and touchpad Type 05-0068-0183
If you use another USB stick than the BARTEC Ex i USB memory stick,
the USB interface can be destroyed.
7.2 Connection of BARTEC USB Ex i memory stick
Preconditions: BARTEC USB Ex i memory stick (it is not allowed to apply any other USB stick!)
Connect BARTEC USB Ex i memory stick to the intrinsically safe socket
for the USB Ex i memory stick during operation.
Only apply the USB equipment mentioned as follows in the safe area!
7.3 Connection of USB CD Rom drive
Precondition: USB CD ROM drive with external power supply (USB 1.1 compatible!)
Connection to the intrinsically safe socket of the USB Ex i memory stick
7.4 Connection of USB mouse and USB keyboard
Precondition: USB HUB (own power supply), USB mouse, USB keyboard
Connection to the intrinsically safe socket of the USB Ex i memory stick

Table of Contents

Related product manuals