Bartell Innovatech Terminator Infinity 2.0 - Specifications and Maintenance; Terminator Infinity Specifications; Tools and Supplies

P a g e | 10
OIPB-I01029-Infinity2.0_v1.2
6. Terminator
®
Infinity Specifications
1. Tools and Supplies
Maintenance tools and supplies are not provided with the machine. The following are
suggested items to have on the job site.
1. 4” or 7” Grinder
2. 10”-15” Crescent Wrench
3. 16-20 oz. Hammer
4. 3/8” or 1/2” Socket Set
5. Grease Gun
6. WD 40
7. 3/4" Open End and Box Wrench
8. Screw Driver Set
9. Safety Glasses
10. Ear Plugs
7. Ventilation Requirements
Charge the batteries only in well-ventilated areas. (See Battery Safety section)
8. Guards, Warning Notices & Signs
The guards, warning notices and signs are placed on the Terminator
®
for your protection. If
one of them becomes damaged or is lost, contact our Customer Service Department to
order a replacement.
Element
English
Metric
Length
66”
1676 mm
Width
26.5”
673 mm
Height
47”
1194 mm
Weight
2430 lbs
1105 kg
Tires (OD x W)
15” x 8”
381 mm x 203 mm
Motor Voltage
48 VDC
Motor Power
4 HP
3 kW
Batteries
6 VDC 400 Ah
Motor Operating Speed
0-3000 RPM
Hydraulic Oil Type
ISO 46
Hydraulic Oil Capacity
11 Gal
41.6 L
Hydraulic Relief Valve Pressure
2200 psi
15.17 MPa